Selection groups

SelectionGroup:

getSelection()

Gets a vector with the items of the selection group.

Name

Name. | Constraints: Conditions: “” input must be non-empty. The name must be unique.

Type:

str

createSelectionGroup(GroupName)

Creates a model group

Parameters:

GroupName (str) – Group name. Conditions: “” input must be non-empty.

removeSelectionGroup(GroupPointer)

Removes a selection group

Parameters:

GroupPointer (SelectionGroup) – Group pointer to erase. Conditions: “” does not exist in the dropdown list.

renameSelectionGroup(GroupPointer, GroupName)

Creates a model group

Parameters:

• GroupPointer (SelectionGroup) – Group pointer to erase. Conditions: “” does not exist in the dropdown list.

• GroupName (str) – Group name. Conditions: “” input must be non-empty.

selectByElemGroup(EntityType, Context, ElemGroup)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• ElemGroup – Selection group: Selection group of mesh elements.

selectByElemGroup(EntityType, Context, SelectMode, ElemGroup)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• ElemGroup – Selection group: Selection group of mesh elements.

selectByGeom(EntityType, Context, Geom)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• Geom – Geometry: Select entities which are located on this geometry.

selectByGeom(EntityType, Context, SelectMode, Geom)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• Geom – Geometry: Select entities which are located on this geometry.

selectByLC(EntityType, Context, LoadCase)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• LoadCase – Load case: Select entities which are activated for the time of this load case.

selectByLC(EntityType, Context, SelectMode, LoadCase)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• LoadCase – Load case: Select entities which are activated for the time of this load case.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val2Y, SelLocMethodZ, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val2Rho, SelLocMethodTheta, Val2Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val2Rho, SelLocMethodTheta, Val2Theta, SelLocMethodZ, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLoc(EntityType, Context, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val2Y, SelLocMethodZ, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val2Rho, SelLocMethodTheta, Val2Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val2Phi – φ2: Second value to select in φ.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLoc(EntityType, Context, SelectMode, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val2Phi – φ2: Second value to select in φ.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLoc(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocX(EntityType, Context, SelLocMethodX, Val1X, Val2X)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

selectByLocX(EntityType, Context, CoordSys, SelLocMethodX, Val1X)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

selectByLocX(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

selectByLocX(EntityType, Context, SelectMode, SelLocMethodX, Val1X, Val2X)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

selectByLocX(EntityType, Context, CoordSys, SelLocMethodX, Val1X, Val2X)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

selectByLocX(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

selectByLocX(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

selectByLocX(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

selectByLocX(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, Val2X)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

selectByLocX(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

selectByLocXY(EntityType, Context, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

selectByLocXY(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

selectByLocXY(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

selectByLocXY(EntityType, Context, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

selectByLocXY(EntityType, Context, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, Val2Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

selectByLocXY(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

selectByLocXY(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

selectByLocXY(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, Val2Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

selectByLocXY(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

selectByLocXY(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, SelLocMethodY, Val1Y, Val2Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

selectByLocXY(EntityType, Context, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, Val2Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

selectByLocXY(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

selectByLocXY(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodTheta, Val1Theta, Val2Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

selectByLocXY(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

selectByLocXY(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodY, Val1Y, Val2Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

selectByLocXY(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodTheta, Val1Theta, Val2Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodX, Val1X, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodX, Val1X, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocXZ(EntityType, Context, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodX, Val1X, Val2X, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodX – X select: Method to select by location in X direction.

• Val1X – X1: First value to select in X direction.

• Val2X – X2: Second value to select in X direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocXZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodRho, Val1Rho, Val2Rho, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodRho – ρ select: Method to select by location in ρ.

• Val1Rho – ρ1: First value to select in ρ.

• Val2Rho – ρ2: Second value to select in ρ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocY(EntityType, Context, SelLocMethodY, Val1Y, Val2Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

selectByLocY(EntityType, Context, CoordSys, SelLocMethodY, Val1Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

selectByLocY(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

selectByLocY(EntityType, Context, SelectMode, SelLocMethodY, Val1Y, Val2Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

selectByLocY(EntityType, Context, CoordSys, SelLocMethodY, Val1Y, Val2Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

selectByLocY(EntityType, Context, SelectMode, CoordSys, SelLocMethodY, Val1Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

selectByLocY(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

selectByLocY(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

selectByLocY(EntityType, Context, SelectMode, CoordSys, SelLocMethodY, Val1Y, Val2Y)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

selectByLocY(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodY, Val1Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocYZ(EntityType, Context, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodY, Val1Y, Val2Y, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodY – Y select: Method to select by location in Y direction.

• Val1Y – Y1: First value to select in Y direction.

• Val2Y – Y2: Second value to select in Y direction.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocYZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodTheta, Val1Theta, Val2Theta, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodTheta – θ select: Method to select by location in θ angle.

• Val1Theta – θ1: First value to select in θ.

• Val2Theta – θ2: Second value to select in θ.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocZ(EntityType, Context, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocZ(EntityType, Context, CoordSys, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocZ(EntityType, Context, CoordSys, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocZ(EntityType, Context, SelectMode, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocZ(EntityType, Context, CoordSys, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodZ, Val1Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

selectByLocZ(EntityType, Context, CoordSys, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByLocZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodPhi, Val1Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

selectByLocZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodZ, Val1Z, Val2Z)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodZ – Z select: Method to select by location in Z direction.

• Val1Z – Z1: First value to select in Z direction.

• Val2Z – Z2: Second value to select in Z direction.

selectByLocZ(EntityType, Context, SelectMode, CoordSys, SelLocMethodPhi, Val1Phi, Val2Phi)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• CoordSys – Coodinate system: Coordinate system to define the location.

• SelLocMethodPhi – φ select: Method to select by location in φ angle.

• Val1Phi – φ1: First value to select in φ.

• Val2Phi – φ2: Second value to select in φ.

selectByMat(EntityType, Context, Material)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• Material – Material: Select entities which use this material.

selectByMat(EntityType, Context, SelectMode, Material)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• Material – Material: Select entities which use this material.

selectByNodeGroup(EntityType, Context, NodeGroup)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• NodeGroup – Selection group: Selection group of nodes.

selectByNodeGroup(EntityType, Context, SelectMode, NodeGroup)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• NodeGroup – Selection group: Selection group of nodes.

selectByNum(EntityType, Context, Val1)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• Val1 – Value 1.

selectByNum(EntityType, Context, Val1, Val2)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• Val1 – Value 1.

• Val2 – Value 2.

selectByNum(EntityType, Context, SelectMode, Val1)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• Val1 – Value 1.

selectByNum(EntityType, Context, SelectMode, Val1, Val2)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• Val1 – Value 1.

• Val2 – Value 2.

selectByPick(EntityType, Context, SelectedProps)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectedProps – Entities selected.

selectByPick(EntityType, Context, SelectMode, SelectedProps)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• SelectedProps – Entities selected.

selectByResult(EntityType, Context, Val1, Val2)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• Val1 – Value 1.

• Val2 – Value 2.

selectByResult(EntityType, Context, SelectMode, Val1, Val2)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• Val1 – Value 1.

• Val2 – Value 2.

selectByResult(EntityType, Context, Val1, Val2, SelGroup)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• Val1 – Value 1.

• Val2 – Value 2.

• SelGroup – Selection group: Search for results in this selection group (mesh nodes or mesh elements).

selectByResult(EntityType, Context, SelectMode, Val1, Val2, SelGroup)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• Val1 – Value 1.

• Val2 – Value 2.

• SelGroup – Selection group: Search for results in this selection group (mesh nodes or mesh elements).

selectBySec(EntityType, Context, Section)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• Section – Cross section: Select entities which use this cross section.

selectBySec(EntityType, Context, SelectMode, Section)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• Section – Cross section: Select entities which use this cross section.

selectBySEGroup(EntityType, Context, SEGroup)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SEGroup – Selection group: Selection group of structural elements.

selectBySEGroup(EntityType, Context, SelectMode, SEGroup)

Select: Select elements from current selection

Parameters:

• Enumerate – { Geometry, Structural, MeshElement, MeshNode, Any, DefaultGroup } EntityType: Entity.

• Enumerate – { NewSelection, Reselection } Context: Context: Create a new selection or change current selection.

• SelectMode – Mode.

• SEGroup – Selection group: Selection group of structural elements.

SelectionGroup(EntityName)

Obtains an entity given its name

Parameters:

EntityName (str) – Entity name.